Common Safety Errors Found in Pressure Washing, Hydroblasting, or WaterJetting

Common Safety Errors Found in Pressure Washing, Hydroblasting, or WaterJetting
Reviewed: 2011-05-17 by Lydia Frenzel
The Advisory Council compiled a Special Report of errors, accidents, incorrect assembly practices and faulty work habits in 2002. Luis Ortega Trotter, who is now deceased, from AcquaBlast in Brazil provided the photos to the Advisory Council WaterJet Workshop on Surface Preparation held at the 2001 WJTA Conference. Ortega was concerned about the difference in the training and education of the work force in Central and South America and developing countries, compared to those of North America-Canada-USA-Europe.
These mistakes seem like “It couldn’t happen on my site.” They are mistakes that might not be observed in a quick inspection. Yet Lydia Frenzel gets calls about cut or frayed hoses, kinked lines, and pressure relief valves that are installed incorrectly. Don’t let this happen on your site. Contact the Advisory Council for a copy.
Luis Ortega received the WJTA Best paper award in 2001 for his Comparison of Abrasive Blasting, Wet Abrasive Blasting, Waterjetting-Hydro Blasting, Needle Gun cleaning, and Grinding on a Pulp Mill in Brasil (Brazil). The paper compares salt residuals and costs. Contact the Advisory Council for a copy and his presentation. Frenzel lost contact with AcquaBlast after Luis Ortega died and Juan C. Ortega became the owner. Web site is www.acquablast.com.br; email: acquablast@acquablast.com.br
The errors include:
1 Incorrect installation of water filter in the wrong direction resulting in deformation of the pressure filter
2 Blown-out hose out due to incorrect installation of particulate water filter.
3 Pressure relief seal installed incorrectly
4 Over tightening of fittings.
5 Caustic in by-pass valve resulting in failure
6 Missing pipe connection that results in blow-out of concrete
7 By-pass assembly damaged from being dropped or falling
8 Cutting of hoses on sharp edges
9 No hose covering or sheathing or protector
10 Destruction of triggers of jetter pistol/gun from caustic so that dual trigger protection was not operational
11 Incorrect scaffolding
12 Employee without gloves, security-safety-tie-off belt; single trigger instead of dual trigger, gun
13 Employee placing a hand in the water bypass (water dump hose)
14 PVC gloves instead of steel mesh or waterjet safety gloves
15 No eye protection or gloves
16 No whip lock or whip check
17 Terminal end of high pressure connection has damaged thread, no lubrication