MSDS and manufacturer’s ASTM F 718 sheets, Shipbuilders and Marine Paints and Coating Product / Procedure Data Sheet for coating system being applied. NOTE: IMPLEMENTING AUTHORITY WILL DESIGNATE SURFACE PREPARATION METHOD TO USE, METHOD 1 UHP WATER JETTING, OR METHOD 2 POWER TOOL CLEANING. NOTE: The Responsible Implementing Authority shall have the authority to reject …
Author Archives: Charles Frenzel
High Traffic Interior Decks
1.1 Cleaning, Surface Preparation and Painting Requirements for High Traffic Interior Decks. MSDS and manufacturer’s ASTM F 718 sheets, Shipbuilders and Marine Paints and Coating Product / Procedure Data Sheet for Coating Systems Being Applied. 4.5.1 Record and restore existing painted labels, compartment designations, hull markings, and other painted information which will be removed or …
Inspector Responsibilities
A Primary Mission of the Council is to promote effective means of surface preparation in the maintenance industry using water and water/abrasive blasting techniques. Checkpoints and final inspections shall be signed off by certified coating inspectors. 4.3.4 COATING INSPECTOR RESPONSIBILITIES: Coating inspectors are responsible for requirements listed in NSTM 631, Section 11.7. 4.10.1 Prevent contamination …
Maintenance Costs and Reform
A Primary Mission of the Council is to promote effective means of surface preparation in the maintenance industry using water and water/abrasive blasting techniques. In Scotland last year a group of coatings manufacturers estimated the coatings maintenance market was $2 Billion Dollars. The estimation for coatings going over water jetting surfaces was 510%. While all …
UHP Equipment
A Primary Mission of the Council is to promote effective means of surface preparation in the maintenance industry using water and water/abrasive blasting techniques. Operating conditions, cleaning rates, and performance differ substantially from standard equipment with several significant advantages applicable in todays environmentally and safety- conscious society. Early in 1971, the first ultrahigh-pressure compact intensifier …
Benchmark Cost Study
A 1975 benchmark study by Battelle-NBS calculated the cost of corrosion to be $70 billion per year, which was 4.2 percent of the nation’s gross national product (GNP). In this study, the total direct cost of corrosion was determined by analyzing 26 industrial sectors in which corrosion is known to exist and extrapolating the results …
UHP Standards and Parameters
The purpose of NSRP Project 3-96-4 was to evaluate the productivity of and areas of hydroblast (water-jetting) removal of coatings on representative areas of a ship, such as the hull, non-skid decking areas, tanks, complex geometry using open and closed loop systems. These procedures include surface cleanliness, surface contamination, coating removal rates, visual appearance, flash …
Blistering on Panels
Neither the United States, nor the Maritime Administration, nor any person acting on behalf of the Maritime Administration, (A) makes any warranty or representation, expressed or implied, with respect to the accuracy, completeness or usefulness of the information contained in this report/ manual, or that the use of any information, apparatus, method, or process disclosed …
Baseline Measurements and Risk Factors
·Atlantic Marine Holding Company – (Prime Contractor) Will contribute shipyard resources and shipyard facility. · Worker fatigue induced by activities involving prolonged and repetitive use of heavy tools and equipment ·Discharge of water (process and storm water) contaminated with heavy metals into adjacent waterways and onto adjacent property via storm drains and into the ground …
Ergonomics of UHP
The project team will strive to achieve a 50% reduction in total costs associated with the UHP Water Blasting Process through industrial engineering methods, ergonomic analysis, and environmental engineering efforts. ·18 shipyards responded to survey (374 surveys mailed) ·38% of responses indicated that they use UHP Waterblasting for surface preparation ·The respondents indicated that most …